Filter
Top Products
74
Remote Interface Reference
• SCPI Command Summary, starting on page 75
• Simplified Programming Overview, starting on page 80
• Using the APPLy Command, on page 83
• Output Setting and Operation Commands, on page 84
• Triggering Commands, starting on page 91
• System-Related Commands, starting on page 94
• Calibration Commands, starting on page 98
• RS-232 Interface Commands, on page 101
• The SCPI Status Registers, starting on page 102
• Status Reporting Commands, starting on page 110
• An Introduction to the SCPI Language, starting on page 113
• Halting an Output in Progress, on page 118
• SCPI Conformance Information, starting on page 119
• IEEE-488 Conformance Information, on page 122
If you are a first-time user of the SCPI language, you may want to refer to
these sections to become familiar with the language before attempting to
program the power supply.
SCPI
SCPI
SCPI