Printer Configuration and Adjustment
User Menus—NETWORK Menu
102
P1066582-002 ZT400 Series™ User Guide 4/8/14
NETWORK Menu
Items in this menu are shown in the order in which they appear when you press the RIGHT
ARROW
. For more information about these settings, see Table 3, Network Settings on page 77.
For more information about print servers and how they function, refer to the Wired and
Wireless Print Server User Guide. A copy of this manual is available at
http://www.zebra.com/manuals.
View the Active Print Server
Only one print server (wired or wireless) can be installed at a time.
Therefore, the print server installed is the active print server.
View the Active Print Server
Only one print server (wired or wireless) can be installed at a time.
Therefore, the print server installed is the active print server.
Set the Printer’s IP Address
View and, if necessary, change the printer’s IP address.
Changes are saved only if WIRED IP PROTOCOL on page 103 is
set to
PERMANENT. To allow any saved changes to take effect,
use RESET NETWORK on page 106 to reset the print server.
See IP Address on page 77 for more information.
Set the Subnet Mask
View and, if necessary, change the subnet mask.
Changes are saved only if WIRED IP PROTOCOL on page 103 is
set to
PERMANENT. To allow any saved changes to take effect,
use RESET NETWORK on page 106 to reset the print server.
See Subnet Mask on page 77 for more information.
ACTIVE PRINT SERVER
INTERNAL WIRED
▼
WIRED IP ADDRESS
000.000.000.000
▲
NEXT
▼
WIRED SUBNET MASK
000.000.000.000
▲
NEXT
