Roper 4411-0046 Manual

A SERVICE OF

next previous

88 WinView/32 Manual Version 2.4.M

➧ On the

Timing

tab page (Figure 68) set the following parameters.

Note:

Depending on the Controller, not all parameters listed below will be

available. Simply ignore any that don’t appear in the dialog box.

Timing Mode:

Free Run

Triggered Mode:

not checked

Continuous Cleans:

not checked

Shutter Control:

Normal

Internal Sync (PI-MAX with PTG only):

selected

Pre Open:

Not checked

Safe Mode (async):

selected

External Trigger:

not checked

Edge Trigger:

+ edge

Delay time:

0

Use Interrupt:

not checked

Wait for TTL:

not checked

➧ On the

Data Corrections

tab page (Figure 69), all correction functions should be

Off.

Figure 68.

Experiment

Setup Window,

Timing tab

page.