DMA Operations Guide Local Cluster Configuration Procedures
72 Polycom, Inc.
9 When the activation key for the first (or only) server appears, record it:
Server A: __________-__________-_________-___________
10 If you have a single-server Polycom DMA system, you’re finished with
this procedure. Continue to the next procedure.
11 If you have a two-server cluster, repeat steps 6–8, this time entering the
second license number you received and the second server’s serial
number (also recorded in step 2).
12 When the activation key for the second server appears, record it:
Server B: __________-__________-_________-___________
To enter license activation key codes
1 Go to Admin > Local Cluster > Licenses.
2 In the Activation key field for the first (or only) server, enter the
activation key code that was generated for that server’s serial number.
3 If you have a two-server cluster, in the Activation key field for the second
server, enter the activation key code that was generated for that server’s
serial number.
4 Click Update.
A dialog box informs you that the licenses have been updated.
5 Click OK.
See also:
“Licenses” on page 67
Caution
An activation key is linked to a specific server’s serial number. For a two-server
cluster, you must generate the activation key for each server using that server’s
serial number. Licensing will fail if you generate both activation keys from the same
server serial number.
Caution
An activation key is linked to a specific server’s serial number. Each Activation
Key field is labeled with a serial number. For a two-server cluster, make sure that
the activation key code you enter for each server is the correct one for that server’s
serial number.
