61
Data - Auto Config/Update Screen
Admin Connections
Perform Auto
Configuration on this
AP next restart
If checked, this AP will perform Auto Configuration the
next time it restarts.
· The wired LAN (NOT the Wireless LAN) will be
searched for compatible APs.
· If a compatible AP is found, its configuration is
copied. If more than one compatible AP exists,
the first one found is used.
· Some data cannot be copied:
o The IP address is not copied, and will
not change.
o The operating mode (Repeater, Bridge,
etc) is not copied, and will not change.
Note: This checkbox is automatically disabled, so the
Auto-configuration is only performed once.
Respond to Auto-
configuration request
by other AP
If checked, this AP will respond to "Auto Configuration"
requests it receives. If not checked, "Auto Configuration"
requests will be ignored.
Provide login name
and password
If enabled, the login name and password on this AP is
supplied to the AP making the Auto-configuration re-
quest. If disabled, the AP making the Auto-configuration
request will keep its existing login name and password.
