Traps & MIBs
C-13
6371-A2-GB20-10
August 2000
Table C-8. Application Test Group Objects (2 of 3)
Object Setting/ContentsDescription
applTestOwner
(testStatusEntry 5)
Identifies who started the test. 1 – 40 characters.
applTestRowStatus
(testStatusEntry 6)
Use to create a new row or
delete an existing row.
Set to active(1) to create a new row.
applPingTestId
(applpingTestEntry 1)
Contains identifier that allows the
Network Manager to view the
results of Ping and TraceRoute
tests.
Device supports only one at a time.
applPingTestIpAddress
(applpingTestEntry 2)
Identifies IP address to be
pinged.
Set destination IP address.
applPingTestSourceIpAddress
(applpingTestEntry 3)
Identifies the source IP address. Set source IP address.
applPingTestPacketSize
(applpingTestEntry 4)
Specifies Ping packet size.
Range includes 28 bytes of
header information.
H 28 – 15028 – Range.
H 64 – Default.
applPingTestTimeout
(applpingTestEntry 5)
Number of seconds between
echo request attempts.
H 10 – Default.
applPingTestMaxPings
(applpingTestEntry 6)
Maximum number of Pings. H 1 – Only supported value.
applPingTestPktsSent
(applpingTestEntry 7)
Number of packets sent. H 1 – Only supported value.
applPingTestPktsRecv
(applpingTestEntry 8)
Number of packets received
without error.
H 0
H 1
applPingTestMinTime
(applpingTestEntry 9)
Minimum round trip time. H 0 – Not supported.
applPingTestMaxTime
(applpingTestEntry 10)
Maximum round trip time. H 0 – Not supported.
applPingTestAvgTime
(applpingTestEntry 11)
Average round trip time. H 0 – Not supported.
applPingTestDomain
(applpingTestEntry 12)
Specifies the destination IP
address’s domain as
management or service. If the
source IP address is entered,
mgmt(2) is not valid.
H mgmt(2) – Management domain.
H service(3) – Service domain.
applPingTestIfIndex
(applpingTestEntry 13)
Specifies the interface over which
the Ping will take place.
Defaults to the interface based upon
current routing.
applTracerouteTestId
(traceroute 1)
Unique TraceRoute test ID. Contains applNewTestID after Get.
applTracerouteIpAddress
(traceroute 2)
Destination IP address for
TraceRoute test.
Set destination IP address.
applTracerouteSourceIpAddress
(traceroute 3)
Identifies the source IP address. Set source IP address.
