A-1
6371-A2-GB20-10
August 2000
Command Line Interface
A
Command Line Interface Feature
The Hotwire DSL router is managed with text commands from the Command Line
Interface. The Command Line Interface can be accessed:
H Locally with an ASCII terminal connected to the Console port, or
H Remotely via a Telnet session.
The Command Line Interface is ASCII character-based and provides the
capability to:
H Display the syntax of commands.
H Change the operational characteristics of the DSL router by setting
configuration values.
H Restore all configuration values to the initial factory defaults.
H Display DSL router hardware and identification information.
H Display system status, including DSL link status and Ethernet status.
H Display a sequence of commands that would have the effect of setting all
configurable parameters to their current value.
Refer to Appendix B,
Configuration Defaults & Command Line Shortcuts.
