Command Line Interface
A-11
6371-A2-GB20-10
August 2000
dhcp server leasetime
min-lease-time max-lease-time
Specifies the lease-time settings used by the DHCP server.
Minimum access level: Administrator/Config
min-lease-time – Default = 120 minutes (2 hours)
max-lease-time – Default = 4320 minutes (72 hours)
Example: dhcp server leasetime 120 320
dhcp server router
ip-address
Specifies the router IP address used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server router 132.53.4.2
dhcp server name
domain name
Specifies the domain name used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server name Clearwater7
dhcp server nameserver
ip-address
Specifies the DNS IP address used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server nameserver 132.53.4.2
DHCP Relay Agent
dhcp relay {enable | disable}
Enables or disables the DHCP relay agent. The DHCP relay agent will maintain up to
256 DHCP clients.
Minimum level access: Administrator/Config
enable – Enable the DHCP relay.
disable – Disable the DHCP relay. Default = disable.
Example: dhcp relay enable
dhcp relay address
ip-address
Use this command to specify the DHCP server to forward DHCP requests to.
Minimum level access: Administrator/Config
Example: dhcp relay address 132.23.4.2
dhcp relay max
number
Use this command to specify the maximum number of DHCP clients.
Minimum level access: Administrator/Config
number – 1 — 256
Example: dhcp relay max 133
