Command Line Interface
A-12
6371-A2-GB20-10August 2000
IP Packet Processing
IP multicast {enable | disable}
Enables or disables the forwarding of IP multicast packets. This setting is retained
across power cycles.
Minimum access level: Administrator
enable – Enable forwarding of IP multicast packets.
disable – Disable forwarding of IP multicast packets. Default = disable.
IP processing {enable | disable}
Enables or disables the processing of IP packets in the service domain. This setting is
retained across power cycles.
Minimum access level: Administrator
enable – Enable processing of IP packets. Default = enable.
disable – Disable processing of IP packets.
Traps
trap {disable | enable}
name of trap
Use this command to enable or disable traps. Default = disable.
Minimum access level: Administrator/Config
Name of Traps:
all
authen fail
ccn
devfail
link up
link down
selftest
test start
test stop
warmstart
For additional information, refer to Appendix C,
Traps & MIBs
.
