71
Appendix B: Advanced troubleshooting
If your printer lights look like
this in configuration mode:
Then your printer: Factory
Default
PPDS Activated setting is off, the factory default.
Turn PPDS Activated on when working in applications
using the PPDS datastream.
There are two settings for PPDS Activated: On and Off.
• Do a brief button press to change the setting (On, Off).
• Do a double button press to scroll to the next menu item,
Auto CRLF/LFCR.
• Do a long button press to select and save a setting for
this menu. As the setting is saved, all operator panel
indicator lights remain on for approximately 2 seconds.
Turn off the printer to exit configuration mode.
Off
LA.bk Page 71 Thursday, February 8, 2001 2:19 PM
