The
Line Monitor Spool
creates a file where information from the Keyspan Manager's Line
Monitor will be stored. You can turn this option on or off.
The
Line Monitor Hold
command will stop the Keyspan Manager from spooling the Line
Monitor data. Deselecting this option will resume the collection of Line Monitor data.
The
Disable Printer Emulation
command will disable Printer port emulation on ALL Keyspan
Mini Port Replicators connected to your computer. Deselecting this option will allow Printer port
emulation on any Keyspan Mini Port Replicator connected to your computer.
The
USE INT Endpoints as Default
command will make ALL Keyspan Mini Port Replicators
connected to your computer default to use
INTERRUPT endpoints
(for better performance at
high baud rates).
The
Assume CTS ON
command will force ALL Keyspan Adapters connected to your computer to
assume that the CTS signal is ON (or HIGH) when CTS is not specified by your serial device's
software or serial cable.
Note: This option is
DISABLED
on the Keyspan High Speed USB Serial
Adapter and Keyspan Mini Port Replicator
.
