A SERVICE OF

logo

Open as PDF
next previous
Keyspan Serial Assistant Window
the
Driver and Assistant Version
items
The
Driver Version
and
Assistant Version
items show the version numbers of the
installed
Keyspan UPSH-112 driver and Assistant respectively. The two version numbers should always
match. If these numbers do not match, you should reinstall the Keyspan software.
the
Serial Adapter Status
text box
The
Serial Adapter Status
text box displays the status of your Keyspan adapter hardware and
software. It detects if the Keyspan driver (
software
) is installed (or found) and whether or not a
Keyspan adapter (
hardware
) is connected.
If your Keyspan adapter hardware and software are installed correctly you will see
'Driver and
UPSH-112 Device found OK' or '...Renumerating...Done' in the
Serial Adapter Status
text box.
If you do not receive either of these messages, proceed
Problem Solving
section in this manual
.
the
USB Status
text box
The
USB Status
text box shows what USB devices (ie hubs, keyboards, mice, etc.) are connected
to your USB bus. This text box will not display serial devices connected to your Keyspan adapter.
the
Advanced Settings
button
The
Advanced Settings
button will access the Keyspan adapter's advance configuration options.
Once you click this button, you will open the
Keyspan Manager
window.
You should only access this option if your serial device requires that
you turn on an advanced option on or if you are sure of what you are
doing. In most cases, you will not need to change any of the adapter's
advanced options.
Keyspan:Mini Port Replicator for Mac OS-v2.6 User Manual
This User Manual applies to the Keyspan Mini Port Replicator Software for
Mac OS
.
(rev 02jun20JA)
Page 11