Hitachi Command Control Interface (CCI) User and Reference Guide 97
Example of CCI commands with HOSTA and HOSTB:
Designate a group name (Oradb) on Hitachi TrueCopy environment of HOSTA.
# paircreate -g Oradb -vl
Designate a group name (Oradb1) on ShadowImage environment of HOSTB. When the
command execution environment is not set, set HORCC_MRCF.
For C shell: # setenv HORCC_MRCF 1
For Windows: set HORCC_MRCF=1
# paircreate -g Oradb1 -vl
These commands create pairs for all LUs assigned to groups Oradb and Oradb1 in the
configuration definition file (four pairs for the configuration in Figure 2.45).
Designate a group name and display pair status on HOSTA.
# pairdisplay -g oradb -m cas
Group PairVol(L/R) (Port#,TID,LU-M),Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M
oradb oradev1(L) (CL1-A , 1, 1-0)30052 266..SMPL ----,----- ---- -
oradb oradev1(L) (CL1-A , 1, 1) 30052 266..P-VOL COPY,30053 268 -
oradb1 oradev11(R) (CL1-D , 2, 1-0)30053 268..P-VOL COPY,30053 270 -
oradb2 oradev21(R) (CL1-D , 2, 1-1)30053 268..SMPL ----,----- ---- -
oradb oradev1(R) (CL1-D , 2, 1) 30053 268..S-VOL COPY,----- 266 -
oradb oradev2(L) (CL1-A , 1, 2-0)30052 267..SMPL ----,----- ---- -
oradb oradev2(L) (CL1-A , 1, 2) 30052 267..P-VOL COPY,30053 269 -
oradb1 oradev12(R) (CL1-D , 2, 2-0)30053 269..P-VOL COPY,30053 271 -
oradb2 oradev22(R) (CL1-D , 2, 2-1)30053 269..SMPL ----,----- ---- -
oradb oradev2(R) (CL1-D , 2, 2) 30053 269..S-VOL COPY,----- 267 -
Example of CCI commands with HOSTB:
Designate a group name (oradb) on Hitachi TrueCopy environment of HOSTB.
# paircreate -g Oradb -vr
Designate a group name (Oradb1) on ShadowImage environment of HOSTB. When the
command execution environment is not set, set HORCC_MRCF.
For C shell: # setenv HORCC_MRCF 1
For Windows: set HORCC_MRCF=1
# paircreate -g Oradb1 -vl
This command creates pairs for all LUs assigned to group Oradb1 in the configuration
definition file (four pairs for the configuration in Figure 2.45).
