A SERVICE OF

logo

Connecting the Printer to Your Computer
4.
If your cable has a grounding wire, connect it to the printer’s
ground connector.
5.
Plug the other end of the cable into your computer. (Fasten the
connector screws to the interface, if required.)
This completes the connection of the serial interface cable. Before
you can use the printer, you need to set it up for serial
communication using the SelecType CH CONFIG option in
Level 2. You may also need to change some interface settings, such
as baud rate and parity, before your printer and computer can
communicate properly. See Chapter 3 for instructions on setting up
the serial interface to work with your computer.
2-22 Testing and Connecting Your Printer