The Font Cartridges
Removing a font cartridge
Follow these to remove a front cartridge:
CAUTION:
Never remove a font cartridge while the
printer is on line, in SelecType mode, or while the printer
is resetting. If you remove a cartridge while the printer is
in one of these states, a REINSERT CARD, REMOVE
CARD, or SERVICE REQ message appears on the
display. An error will also occur if you remove a
cartridge while the FEED light is on, even if the printer is
off line. See the description of card error messages in
Chapter 7 for more information.
1. Make sure the printer is off line or turned off. If the FEED light
is on, press the FEED button to print out the data in the printer
before you remove the cartridge.
2.
Grasp the edges of the cardridge and slowly pull it from the
slot, as shown below.
3.
Turn on the printer or press ON LINE to set the printer on line.
A-8
Appendix A
