A SERVICE OF

logo

Open as PDF
next previous
Printing Problems
Problem
Solution
The printout is not
what you expect
(continued).
Some or all of the
output is garbled.
The interface cable may not be plugged in
completely. Make sure that both ends of
the cable are plugged in securely.
The interface may not be configured
correctly. If you are using a serial interface,
make sure that both the computer and
printer are set to use the same number of
data bits per word and that they both use
the same parity, baud rate, and number of
stop bits.
You can also use the data dump mode to
check the data being sent from the
computer. See the section on data dumps
later in this chapter.
If the printer still does not print correctly,
contact your dealer.
7-24
Troubleshooting