467
Switch(Config-If-Vlan3)# ip pim sparse-mode
16.4.4 PIM-SM Troubleshooting Help
16.4.4.1 Monitor and Debug Commands
16.4.4.1.1 show ip pim bsr-router
Command: show ip pim bsr-router
Function: Display pim bsr-router information.
Parameter: N/A.
Default: No display by default.
Command mode: Admin Mode
Example: Display pim bsr-router information.
Switch #show ip pim bsr-router
Switch #
PIMv2 Bootstrap information
BSR address: 192.4.1.3
Priority: 192, Hash mask length: 30
Expires : 00: 02: 13.
Switch #
Displayed information Explanation
BSR address Bsr-router address
Priority Bsr-router priority
Hash mask length Bsr-router hash mask length
Expires The remaining time before considering the
Bsr-router to be invalid.
16.4.4.1.2 show ip pim interface
Command: show ip pim interface [<ifname>]
Function: Display information for the PIM interface.
Parameter: <ifname> is the interface name, i.e. display PIM information of the specified
interface.
Default: No display by default.
Command mode: Admin Mode
