Filter
Top Products
VIZIO VP42 HDTV User Manual
Version 9/11/2006 53
www.VIZIOCE.com
4.14.3 Picture-In-Picture(PIP)/Picture-by-Picture(POP)Mode
Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
MAIN
TV AV1 AV2
Component
1
Component
2
HDMI 1 HDMI 2 RGB
TV
9 9 9
9
9
AV1
9 9 9
9
9
AV2
9 9 9
9
9
Component 1 9
9 9
9
9
Component 2 9
9 9
9
9
HDMI 1 9
9 9 9 9
9
HDMI 2
9 9 9 9 9
9
RGB 9
9 9
9
9
“
9” – Indicates which inputs are available for PIP and POP modes.
*When HDMI is used for the Sub-Screen it cannot support 1080i.
4.14.4 Adjusting Basic PIP/POP Settings
The PIP channel is independent of the main TV
channel. To change the PIP channel, press the PIP
CH + or - button on the remote control.
Repeated pressing of the PIP button will cycle through
PIP, POP and Off.
Repeated pressing of the PIP INPUT button will cycle
through the inputs for PIP. This button has no effect
when PIP is off.
Press the PIP SIZE button to alternate between Small,
Medium and Large PIP sizes.
You can swap the program that is in the main picture
with the program in the PIP sub-picture. To swap the main picture program with the PIP sub-picture
program, press SWAP on the remote control. If you press SWAP again, it will return the program to the
main picture. This works the same if you are in the Picture-by-Picture (POP) mode.