Filter
Top Products
VIZIO VP42 HDTV User Manual
Version 9/11/2006 27
www.VIZIOCE.com
2.5.2 Using Your Antenna or Cable for TV
1. Turn off the power to the Plasma HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable to the
DTV/TV CABLE/ANTENNA connector at the rear of the Plasma HDTV
3. Turn on the power to the Plasma HDTV.
4. Select TV using the INPUT button on the remote or side of the Plasma
HDTV, or directly by pressing the TV button on the Remote Control.
2.5.3 Using the Antenna or Cable through your VCR
1. Turn off the power to the Plasma HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the
rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear
of the Plasma HDTV.
3. Turn on the power to the Plasma HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of the Plasma
HDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.