Filter
Top Products
VIZIO VP42 HDTV User Manual
Version 9/11/2006 28
www.VIZIOCE.com
2.6 Connecting an external Receiver/Amp
1. Turn off the power to the Plasma HDTV and Receiver/Amp.
2. Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white
area) audio connectors at the rear of the Plasma HDTV.
3. Turn on the power to the Plasma HDTV and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the on the remote control to
select the Audio Adjust menu.
6. Press the on the remote control to
select SPEAKERS.
7. Press the on the remote control to
select OFF so that the sound from the
Plasma HDTV will now be routed
through your Receiver/Amp system.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital
audio input you can connect it to the optical DIGITAL
AUDIO OUT (black area) at the rear of the Plasma
HDTV. This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA
input.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.