Filter
Top Products
20
Setting sound options
(Audio Setup)
“Audio Setup” allows you to adjust your audio
settings according to the playback conditions.
The default settings are underlined.
Select “Audio Setup” in the Setup display.
x Audio Digital Out
Switches the methods of outputting audio
signals when you, connect 1. a digital
component such as a receiver (amplifier) with a
digital connector, 2. an audio component with a
built-in decoder (Dolby Digital or DTS), 3. a
DAT or MD deck, via the DIGITAL OUT
(OPTICAL) connector using an optical digital
cable. For connection details, see page 8.
You cannot adjust “Dolby Digital” and “DTS”
if you set “DIGITAL OUT (OPTICAL)” to
“Off.”
x DIGITAL OUT (OPTICAL)
Selects output signals via the DIGITAL OUT
(OPTICAL) connector.
The item that you have selected in the System
Configuration menu will be the current setting
here.
• On : Normally select this position.
When you select “On,” you can set “Dolby
Digital” and “DTS.”
• Off : when the console does not output
sound signals via the DIGITAL OUT
(OPTICAL) connector, the influence of the
digital circuit upon the analog circuit is at a
minimum.
Note
When you select “Off,” you cannot set “Dolby Digital”
and “DTS.”
x Dolby Digital
Selects the Dolby Digital signals to be output
via the DIGITAL OUT (OPTICAL) connector.
• On : when the console is connected to an
audio component with a built-in Dolby
Digital decoder.
If the console is connected to an audio
component without a built-in Dolby Digital
decoder, do not turn this option on. If you
select this option by mistake, when you play
a Dolby Digital audio track, a loud noise (or
no sound) will come out from the speakers,
possibly hurting your ears or damaging the
speakers.
• Off : when the console is connected to an
audio component without a built-in Dolby
Digital decoder.
x DTS
Selects the DTS signals to be output via the
DIGITAL OUT (OPTICAL) connector.
• On : when the console is connected to an
audio component with a built-in DTS
decoder.
If the console is connected to an audio
component without a built-in DTS decoder,
do not turn this option on. If you select this
option by mistake, when you play a DTS
audio track, a loud noise (or no sound) will
come out from the speakers, possibly hurting
your ears or damaging the speakers.
• Off : when the console is connected to an
audio component without a built-in DTS
decoder.
x Audio Track Auto Select Mode
Gives the audio track which contains the
highest number of channels priority when you
play a DVD on which multiple audio formats
(PCM, DTS or Dolby Digital format) are
recorded.
• On : Priority given.
• Off : No priority given.
Notes
• When you set this item to “On,” the language may
change depending on the “Audio” settings in
“Language Setup.”
The “Audio Track Auto Select Mode“ setting has
higher priority than the “Audio” settings in “Language
Setup” (page 18).
• If you set “DIGITAL OUT (OPTICAL)” to “On” and
“DTS” to “Off” in “Audio Setup,” the DTS audio track
is not played even if you set this item to “On” and the
highest-numbered audio channel is recorded in DTS
format.
• If PCM, DTS and Dolby Digital audio tracks have the
same number of channels, the console selects PCM,
Dolby Digital and DTS audio tracks in this order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS or Dolby Digital format
by selecting “On.”
x DVD Video Volume
If the audio output level of the DVD is low, you
can turn up the volume of the DVD. (Note:
DIGITAL OUT (OPTICAL) must be set to “Off”
to access this function.)
• +2 : You can turn up the volume.
• +1 : You can turn up the volume.
• Standard : Original audio volume. Normally
select this position.
Note
Depending on the DVD, the sound may be distorted if you
select “+1” or “+2.”
Settings and adjustments (continued)
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
After changing DVD settings
To save your changes, be sure to eject the DVD
before pressing the 1/RESET button or
turning off the unit with the MAIN POWER
switch. Please note that changes will not be
saved if you reset or turn off the console
without first ejecting the DVD.