Filter
Top Products
35
Adjusting DVD player settings
DVDs
US
Audio Digital Out
You can switch the method of outputting the audio signal when you
connect the following audio devices to the DIGITAL OUT (OPTICAL)
connector.
Caution
When the console is connected to an audio device without a Dolby Digital or
DTS decoder, set "Dolby Digital" and "DTS" to "Off". If you set these options
to "On" without the necessary decoder, you may have no sound or an extremely
loud noise may be emitted.
Digital Out (Optical)
This option sets the type of output for the DIGITAL OUT (OPTICAL)
connector.
Dolby Digital
This option sets Dolby Digital as the output signal for the DIGITAL OUT
(OPTICAL) connector.
DTS
This option sets DTS as the output signal for the DIGITAL OUT
(OPTICAL) connector.
Audio Track Auto Select Mode
This setting gives priority to the audio track that contains the highest
number of channels when you play a DVD on which multiple audio
formats (PCM, Dolby Digital or DTS) are recorded. If PCM, Dolby Digital
and DTS have the same number of channels, the console selects PCM,
Dolby Digital and DTS audio tracks in that order.
Setting sound options
On Select this option when you want sound (audio signal) to be output
through the DIGITAL OUT (OPTICAL) connector.
Settings for "Dolby Digital" and "DTS" are displayed.
Off Select this option when you do not want sound to be output through the
DIGITAL OUT (OPTICAL) connector.
Settings for "Dolby Digital" and "DTS" are not displayed.
On Select this option when the console is connected to an audio device
with a built-in Dolby Digital decoder.
Off
Select this option when the console is connected to an audio device
without a built-in Dolby Digital decoder.
On Select this option when the console is connected to an audio device
with a built-in DTS decoder.
Off
Select this option when the console is connected to an audio device
without a built-in DTS decoder.
On Priority given
Off
No priority given