Filter
Top Products
Using the RS 220
24 | RS 220
Associating a second pair of headphones to the
transmitter
The headphones and the transmitter are already associated upon delivery.
If you want to use a second pair of headphones, you have to associate it to
the transmitter.
When associating the headphones to the transmitter, the distance
between the transmitter and the headphones should not exceed 1 m.
̈ Switch the transmitter on (see page 16).
̈ Press the On/Off button 8 on both pairs of headphones to switch the
headphones on.
The headphones search for a suitable transmitter. The Power LED 9 of
the already associated headphones lights up while the Power LED 9 of
the new headphones flashes.
̈ Press and hold the On/Off button 8 on the new pair of headphones
until the Power LED 9 alternately flashes blue/red.
̈ Press the Pairing button 9 on the transmitter.
The ON LED G of the transmitter flashes green/red. After approx.
2 seconds, the headphones are paired with the transmitter and you can
hear your audio source. The Power LED 9 of the headphones lights up
blue, the ON LED G of the transmitter lights up green.
The volume and the balance of the each pair of headphones can be
adjusted individually.
DC IN
5V/1A
IN OUT
IN
OUT
COAXIAL
OPTICAL
DIGITALANALOG
R
L
Pairing
-LEVEL
ON
8
9
I