Filter
Top Products
Using the RS 220
RS 220 | 21
Selecting an audio source or toggling between audio
sources
You can connect different audio sources to the transmitter. Once you have
connected an audio source, you then have to select the audio source.
If you have connected different audio sources to the transmitter, you can
toggle between the audio sources:
̈ Touch the touch key for selecting the audio source E on the trans-
mitter or press the Input button 0 on the headphones.
The selected input (“IN”) on the transmitter is retained in memory when
the transmitter is switched off.
Press the buttons repeatedly until
one of the following displays lights up
Selected input (“IN”)
on the transmitter
ANALOG IN ·
COAXIAL IN »
OPTICAL IN ¿
0
E
Analog
Coaxial
Optical