Filter
Top Products
9
Tap [Communication Settings].
SSID, Network Key (security
code), and Channel Setting can
be changed.
SSID can be specified using 1 to
32 characters, Network Key with
0 or 8 to 63 characters.
Characters that can be used are
single-byte alphanumeric
characters and “_” (underscore).
If you change a setting, tap 2.
When the message [Enable the
settings?] appears, tap [OK].
Then, turn the camera off and on
again, and then establish a
wireless LAN connection again.
t Memo
• For security reasons, it is recommended that the memory
card be used after changing the SSID and Network Key.
• The changed SSID and Network Key can be reset to the
default settings using the [Wireless Memory Card] setting of
the camera.
The default settings are as follows.
• SSID FLUCARD_for_PENTAX
• Network Key 12345678
Communication Settings