Filter
Top Products
14
t Memo
• If the camera is turned off and
on again when [Auto Wi-Fi
Startup] is set to [off], the
wireless LAN function is turned
off again. To always keep it set
to on, change [Auto Wi-Fi
Startup] to [on].
When the [SSID] and [Network Key] settings of [Communication
Settings] are changed, the changed settings can be returned to
their default settings using the control image.
1 Insert the memory card into the camera.
2 With the camera in
playback mode,
display the image to
reset the
communication
settings.
3 Press B to display the playback mode palette.
4 Select Y (Protect) and specify either [Protect]
or [Unprotect].
The settings are reset when the protection setting is
changed.
5 Press F to exit the playback mode palette.
6 Turn the camera off and on again.
The [SSID] and [Network Key] settings are returned to their
default settings.
t Memo
• For security reasons, it is recommended that the memory
card be used after changing the SSID and Network Key.
• When using this memory card on a non-compatible camera,
the default settings are as follows.
• SSID PENTAX_Flucard_WiFi
• Network Key 12345678
Resetting the Communication Settings