Filter
Top Products
18 Pelco Manual C581M-B (1/04)
OPERATION KEYBOARD COMMAND RESULT
Table B. Operation Guide (Continued)
1. Press the SPOT MONITOR key. The green LED over
the SPOT key lights.
2. Select the camera.
Addressing by Multiplexer (Switch 7 OFF)
a. On the number pad, press the address number of the
multiplexer (1-16 if the keyboard is connected to a
multiplexer; 1-8 if the keyboard is connected to a
server), then press the UNIT key. The LED displays
the address.
b. On the number keypad press the number of the
camera (1-16), then press the CAM key.
Addressing Consecutively (Switch 7 ON)
On the number keypad press the number of the
camera, then press the CAM key. Refer to Table C for
camera numbers.
3. On the number keypad press the number of the
auxiliary you want to operate, then press the AUX ON or
OFF key.
For duplex multiplexer, recording is done automatically.
For simplex multiplexer, the multiplexer must be in the
record mode (DISPLAY/RECORD LED is ON).
1. Press the MAIN MONITOR key. The green LED over the
MAIN key lights.
2. On the number pad, press the address number of the
multiplexer (1-16 if the keyboard is connected to a
multiplexer; 1-8 if the keyboard is connected to a
server), then press the UNIT key. The LED displays the
address.
3. Press the LIVE/VCR key to put the multiplexer in the
playback mode.
4. Select the cameras to play back from one of the
following choices:
• For an individual camera, press the number of the
camera, then press the CAM key. If switch 7 is OFF,
enter a camera number from 1-16. If switch 7 is ON,
refer to Table C for camera numbers.
• For multiple camera display, press the key below the
4, 9, or 16 icon.
• For sequencing, select an individual or multiple
camera display, then press the SEQ button.
5. Turn on the VCR and press the PLAY button.
Play a tape.
Displays the recorded cameras in
the selected format on the MAIN
monitor.
Turn an auxiliary
function on or off.
The auxiliary function operates.
Records all cameras connected to
the multiplexer.
For simplex multiplexer, while the
multiplexer is in the record mode
(DISPLAY/RECORD LED on ON)
you can only see a full-screen view
of one camera (or one camera at a
time if sequencing) on the main
monitor, but all active cameras are
being recorded.
Record a tape.