Filter
Top Products
E-21
ENGLISH
ADJUSTING THE AUDIO/VIDEO
Once the image appears, adjust the VOLUME and CONTRAST.
Adjusting the volume
1. Move the Multi Control button up/down (ᮡ,ᮢ)
while the normal screen is displayed. The
volume level appears on the screen.
2. Move the Multi Control button up/down (ᮡ,ᮢ) to
adjust the volume.
ᮡ: Increases the volume.
ᮢ: Decreases the volume.
● The volume level is set to the 8th bar on the scale at
the factory.
● When VOLUME LIMIT is set to ON, the volume is
limited to a certain level in order to avoid excessive
noise, ear damage, or the inability to hear outside
sound. (
੬ pg.23)
● To return to the normal screen, press the Multi
Control button. If there is no operation for 3 seconds
or more, the adjusted volume level will be activated,
and the display will return to the normal screen.
Adjusting the contrast
1. Move the Multi Control button right/left (
ᮤ, ᮣ
)
while the normal screen is displayed. The
contrast level appears on the screen.
2. Move the Multi Control button right/left (
ᮤ, ᮣ
) to
adjust the contrast.
ᮣ: Increases the contrast.
ᮤ: Decreases the contrast.
● The contrast is set to “0” at the factory.
● The contrast can also be set through the Menu screen
(
੬ pg.22).
● To return to the normal screen, press the Multi
Control button. If there is no operation for 3 seconds
or more, the adjusted contrast level will be activated,
and the display will return to the normal screen.
VOLUME
VOLUME LIMIT
ON
CONTRAST
On-Screen Display
To the video component
To the video component