Filter
Top Products
E-18
WATCHING VIDEO (Cont.)
SEE MANUAL FOR SAFETY
INFORMATION BEFORE
USING.
MAY DISTURB VISION,
BALANCE OR HAND-EYE
COORDINATION.
NOT FOR USE BY
CHILDREN UNDER 16.
WARNING TO PREVENT
SERIOUS INJURY
PRESS TO CONTINUE.
2
On-Screen Display
ENTER YOUR PASSWORD.
INPUT VIDEO SIGNAL.
Acknowledge the warning, then enter the
password.
1. Acknowledge the warning on the screen,
then press the Multi Control button. The
password entry screen appears.
● If the Multi Control button is not pressed on the
warning screen, the password entry screen will
not appear.
● The power will be turned off if there is no
operation for 1 minute.
2. When the password entry screen appears,
press the Multi Control button three times
to select the number ‘ ’ for the three
digits.
● The password is set to when this product
is used for the first time or after it is reset (੬pg.
24), therefore, the first entry will always be
.
● If no video signal is input to this unit, the message
“INPUT VIDEO SIGNAL.” will appear on the
display. If this occurs, check the power and
connection to the video component. If a video
signal is input, the message will disappear. The
power will shut off automatically if a video signal is
not input to this unit for approx. 1 minute.
● If you do not wish to use the password registration,
you can cancel it. Refer to pg. 26 for REGISTERING,
CHANGING OR CANCELING THE PASSWORD.
The Eye-Trek is now set.
Start playback on the video component. The image will appear on the Eye-Trek.