Filter
Top Products
Wiring 5-4
COMPUTER MOTHERBOARD ASSEMBLY
20-10554
MOTHERBOARD CONNECTOR AND JUMPER STATUS
(NOTES FOR CHART ON FOLLOWING PAGE)
NOTES:
1. Jumper is not required for this game. No telephone connection necessary for operation.
2. Jumper is not required for this game. A proprietary network is used for game linking.
3. Connections not required for this game. No ATAPI devices (CD ROM) are used in this game.
4. Jumper is not required for this game. The tamper detection security feature is not installed.
5. Connect processor module fan to this jack. Computer may become unreliable if processor overheats.
6. Connect processor module to this jack. The 242-pin socket accepts single microprocessor modules.
7. Connections not required for this game. The case cooling fans connect directly to the power supply.
8. Connections not required for this game. No SCSI device (Hard Disk Drive) are used in this game.
9. Connect the reset cable from the Filter Card Assembly to this jack. No front panel devices are used.
10. Jumper must be set over pins 1 & 2 for this game. Game will not run if jumper is incorrect or missing.
* Replacement Motherboards may not include this jumper. Refer to Parts to order extra shunt jumpers.