Filter
Top Products
tel (203) 647-8700 Page 37 Product Manual - MAN-000001C
Front Panel Network SetupSECURE CONSOLE SERVERS
Figure 4.8 SCS Front Panel Display, editing the Net Mask setting
As soon as you change a digit, an asterisk (*) will appear to the right on the top line,
indicating that a parameter has changed. Change the Net Mask as desired.
Note
Ignore any leading 0’s in the display entry. The SCS will adjust for
them and will not store the leading zeroes when saving the data.
When you have the complete parameter value as it should be, press the 'ENTER'
button to complete the entry. The display will show the following:
Figure 4.9 SCS Front Panel Display, showing the new Net Mask display
Your new value will be stored when you are finished setting all the Network param-
eters.
Gateway
Now, enter your Gateway parameter information. Press the Down Arrow once to
continue.
Figure 4.10 SCS Front Panel Display, showing the current Gateway setting
Press the ENTER button to edit the Gateway parameter. The current Gateway set-
ting will be displayed, with a cursor under the first digit.
Edit Net Mask
255.200.000.000
*
Net Mask
255.255.000.000
Gateway
010.001.002.003