Filter
Top Products
tel (203) 647-8700 Page 27 Product Manual - MAN-000001C
SCS160R / SCS320R Power ModulesSECURE CONSOLE SERVERS
3.3.1 AC Power Module Replacement
The AC Power Modules of the SCS160R and SCS320R may be hot-swapped if
necessary by a competent technician. Each slide-in power module is held in place with
a single screw and does not need to be removed except for replacement.
Figure 3.4 AC Power Module (shown removed from SCS-R)
If you need to replace one of the power supply modules, determine which module
has failed (left or right, if looking at the rear of the chassis) by reading the front panel
display. The module slides in from the rear of the chassis.
A single captive screw (visible from the rear of the chassis) holds the AC Power
Module in place, and also establishes a protective Earth ground connection for the sys-
tem. Be certain to turn off the failed Power Module (switch on Module to O position),
then remove its power cord connection. You can then unscrew that Module and pull
it firmly from the chassis using the metal loop on the module.