Filter
Top Products
Initial Configuration
SCS160 / SCS320 / SCS480 Page 32 www.thinklogical.com
SCS160R / SCS320R
Figure 4.2 PuTTY Configuration Screen
The first time you connect using ssh, you will get a warning about the ssh authen-
tication keys. Accept the newly-generated keys by choosing ‘yes’.
5. Login to the SCS
When connected to the SCS, the ‘login as:’ prompt will appear. You want to
log in as root. Press Enter to continue.
The ‘password:’ prompt comes up next. Enter root (the default root pass-
word) and press Enter.
You should at the SCS’s root command prompt after pressing the Enter key. In
our case, we connected using PuTTY to ssh into 10.9.8.7:
Figure 4.3 Terminal screen, showing a typical root login to SCS