Filter
Top Products
Initial Configuration
SCS160 / SCS320 / SCS480 Page 36 www.thinklogical.com
SCS160R / SCS320R
As soon as you change a digit, an asterisk (*) will appear to the right on the top line,
indicating that a parameter has changed.
Figure 4.5 SCS Front Panel Display, Asterisk indicating a change
When you have the complete parameter value as it should be, press the ENTER
button to complete the entry.
The display will show the following:
Figure 4.6 SCS Front Panel Display, after editing the IP Address
Your new value will be stored when you are finished setting all the Network param-
eters.
Net Mask
Press the Down Arrow once to advance to the Net Mask parameter.
Figure 4.7 SCS Front Panel Display, showing the current Net Mask
Press the ENTER button to change the Net Mask parameter. The current Net
Mask setting will be displayed, with a cursor under the first digit. The factory default is
255.0.0.0.
Press the Left or Right arrow button to move the cursor to the first digit to be
changed. To change a digit, use the Up or Down arrows to change the number.
Edit IP Address
192.168.075.239
*
IP Address
192.168.075.239
Net Mask
255.000.000.000