Filter
Top Products
3-6
Integrated Services Adapter and Integrated Services Module Installation and Configuration
OL-3575-01 B0
Chapter 3 Removing and Installing the ISA and the ISM
ISA or ISM Removal and Installation
Cisco 7200 Series—Removing and Installing the ISA
Step 1
To remove the service adapter,
place the port adapter lever in the
unlocked position. (See A.) The
port adapter lever remains in the
unlocked position.
Step 2
Grasp the handle of the service
adapter and pull the service adapter
from the router. If you are removing
a blank port adapter, pull the blank
port adapter completely out of the
chassis slot.
Step 3
To insert the service adapter,
carefully align the service adapter
carrier between the upper and the
lower edges of the port adapter slot.
(See B.)
Step 4
Carefully slide the new service
adapter into the port adapter slot
until the service adapter is seated in
the router midplane.
Step 5
After the service adapter is properly
seated, lock the port adapter lever.
(See A.)
29339
2
0
4
1
3
5
6
FAST SERIAL
EN
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TOKEN RING
0
1
2
3
Cisco 7200
Series
CPU RESET
ENABLED
MII
EN
RJ45
EN
RJ45
LINK
1O PWR
OK
RJ-45
FAST ETHERNET INPUT/OUTPUT CONTROLLER
PCMCIA
EJECT
SLOT 0
SLOT 1
FE MII
ENABLED
MII
LINK
RJ45
FAST ETHERNET
0
ETHERNET 10BT
ENABLED
0
2
1
3
LINK
0
1
2
3
Port adapter lever
(locked position)
Port adapter lever
(unlocked position)
Note: This adapter
removal applies to any
port or service adapter.
A
B
MII
EN
RJ45
EN
RJ45
LINK
1O PWR
OK
RJ-45
CPU RESET
FAST ETHERNET INPUT/OUTPUT CONTROLLER
ENABLED
PCMCIA
EJECT
SLOT 0
SLOT 1
FE MII
2
4
6
Cisco 7200
Series
1
3
5
ETHERNET 10BT
ENABLED
0
2
1
3
LINK
0
1
2
3
ENABLED
MII
LINK
RJ45
FAST ETHERNET
0
TOKEN RING
0
1
2
3
Slot
guide