Filter
Top Products
3-5
Integrated Services Adapter and Integrated Services Module Installation and Configuration
OL-3575-01 B0
Chapter 3 Removing and Installing the ISA and the ISM
ISA or ISM Removal and Installation
Cisco 7100 Series—Removing and Installing the ISM
29332
Step 1
To remove the ISM, use a number 2 Phillips screwdriver to
loosen the captive installation screws.
Step 2
Grasp the captive installation screws of the ISM to pull it from the
router.
Note: When inserting the ISM, hold the ISM up at a
slight angle to engage the carrier guides. Completely
seating the ISM in the slot may require several attempts.
Step 3
To insert the ISM, carefully align the ISM carrier between the
upper and the lower edges of the service module slot (slot 5).
Step 4
Carefully slide the ISM all the way into the slot until it is seated in
the router midplane.
Step 5
After the ISM is properly seated, tighten the captive installation
screws.
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TD
EN
TC
RD
RC
LB
CD
5
I
TC
RD
RC
LB
CD
TD
EN
ERROR
BOOT
RESET
SM-ISM
ISM in slot 5
Captive installation screws