26 27
PROGRAM SCHEDULE AND HOLDS
Press [Next], then [FAN] to set the fan mode of the
first event.
CHANGING PROGRAM SCHEDULES (CONTINUED)
Press [Next] to advance to the next event.
Press [DONE] to save the schedule for the day.
Press [COPY]
programmed to any other day.
OR
Press [CANCEL] to proceed to the next day and repeat
PROGRAM SCHEDULE AND HOLDS
TEMPORARY PROGRAM HOLD
Press
or
when the schedule is running. This will temporarily hold
the temperature setting until the next scheduled event.
PROGRAM SCHEDULE HOLDS – TEMPORARY
Heat Blast
™
will raise the current room temperature 3°F
normal operation.
Press [Heat Blast] to activate Heat Blast.
Note:
in the Installer Setup and the thermostat is in Heat or
Emergency Heat mode.
To cancel Heat Blast
press [CANCEL], or
[Heat Blast], or the
HEAT BLAST
™
