Data Ports
Standard Ports
Zebra XiIIIPlus Users Guide 45
5656,QWHUFRQQHFWLRQV
An interface adapter (Zebra part number 33130) is required to connect the printer’s
RS-232 DB-9 interface to a host computer through an RS-422 or RS-485 interface. A
generic DB-25 adapter can be used.
This illustration shows the cable wiring for interconnecting the DB-9 to the interface
adapter’s DB-25 female connector.
86%3RUW
In addition to serial and parallel data ports, a USB 2.0 port (which is USB 1.1- and 1.0-
compatible) is available to connect your printer to the host equipment.
Caution • A qualified service technician must install a jumper on the main logic
board at JP1, Pins 2 and 3 for the RS-422/RS-485 interface adapter to function
properly.
Female DB-25 Connector on
RS-422/RS-485 Adapter
Data input B (–)
Data input A (+)
Data output B (–)
Data output A (+)
Frame ground
Signal ground ref.
+5 VDC 725 mA source
1
9
11
13
14
16
19
NOTE: Pins 2–8, 10, 12, 15, 17, 18, and 20–25 are unused and unterminated.
