19
Program the Water Softener -- Model WHES30
UP button
DOWN Button
PROGRAM button
RECHARGE button
Display
PRESSTOSCHEDULE
HOLDTOST ART
+
−
PROGRAM
RECHARGE
SET
SAL T
LEVEL
CHECK
SAL T
LEVEL
SETSALTLEVELbutton
Figure 11
If you have questions about installation, programming, operating and routine maintenance...
call 1--866--986--3223, Monday -- Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electric al outlet, a model code and a test number (example:
s3.0), beginto flash inthe faceplatedisplay.Then,12:00PMandthewords“CURRENTTIME” begin
to flash.
NOTE: If -- -- -- -- show s in the display, press the UP
+
or DOW N
−
button until LE31
shows in the display. Then, press the
PROGRAMbutton toset, andchange tothe
flashing CURRENT TIME display.
Set Time of Day
If the words “CURRENT TIME” do not show in the display, press the PROGRAM button until
they do.
1. Press the
+
Up or
−
Down buttons tosetthe presenttime. Upmoves the display ahead;down
sets the time back.
Be sure AM or PM is correct.
NOTE: Press buttons and quic kly release to slowly advance the display. Hold for fast
advance. This procedure applie s for all following settings.
