V
X
810 INSTALLATION GUIDE 9
CHAPTER 2
Setup
This chapter describes the setup procedure for V
x
810, in the following sections:
• Select Location
• Unpack Shipping Carton
• Examine V
x
810 Features
• Install/Replace MSAM Cards
• Privacy Shield
• Cable Connections
• Power Supply
• Smart Card Reader Use
• Magnetic Card Reader Use
Select Location
Use the following guidelines to select a location for the V
x
810.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and the terminal, ECR, or computer
connected to the V
x
810. For safety, do not string cables or cords across a
walkway.
Environmental
Factors
• Do not use the unit where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the unit away from direct sunlight and anything that radiates heat, such
as a stove or a motor.
• Do not use the V
x
810 outdoors.
CAUTION
The V
x
810 is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust can void any warranty.
