A SERVICE OF

logo

SECTION V. BUTTONHOLE
Buttonhole
(_) Needle positions selector dial:
_) Stitch length dial: 0°5 to 1
® Stitch width dial: 0 to 5
(_ Needle thread tension: t to 4
Stitch width dial setting: (A) Set the dial at "2" for line-tack
_._ (B) Set the dial at "5" for bar-tack
(Bar-tack)
[] Pull 6" (15 cm) of both threads to the side and under
the presser foot+
(_ Needle thread
® Bobbin thread
[] Set the stitch length dial at "0" and the stitch width dial
at "5"+
[] Lower the needle at the starting position, and lower the
presser foot. Sew 5 stitches for the bar-tack, then stop
the machine with the needle in the left position.
® Stitch length dial: 0
(_ Stitch width dial: 5
® Starting position
(Une-tack)
[] Set the stitch length dial at "0.5" and stitch width dial
at "2"+
_) Stitch length dial: 0.5
® Stitch width dial: 2
[] Sew the line-tack stitch for the desired length.
f
[]
[]
[]
[]
[]
®
®
®
e
@
® ®
J
48