8. Programmable Features
48
Changing the LCD
display contrast
Base unit:
{#}{3}{9}
For the base unit display contrast only:
{1} “NORMAL” (default)
{2} “DARKER”
Cordless
handset:
{0}{1}
For the cordless handset display contrast only:
{1} Level 1
{2} Level 2
{3} Level 3 (default)
{4} Level 4
{5} Level 5
{6} Level 6
Changing the fax
activation code
{#}{4}{1} If you wish to use a cordless handset (page 33) or an extension
telephone (page 33) to receive faxes, activate this feature and
program the activation code.
{0} “OFF”
{1} “ON” (default)
1. {MENU} i {#}{4}{1}
2. Press {1} to select “ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
L The default code is “;#9”.
4. {SET} i {MENU}
Setting the memory
reception alert
{#}{4}{4} To alert you with a beeping sound when a received fax document
is stored into memory due to some existing problem.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
Setting friendly
reception
{#}{4}{6} To receive a fax automatically when you answer a call and hear a
fax calling tone (slow beep).
{0} “OFF”: You have to press {FAX START} for fax reception.
{1} “ON” (default): You do not have to press {FAX START} for fax
reception.
Setting the fax voice
guidance
{#}{4}{7} If you wish to hear voice guidance for fax transmission/reception,
activate this feature.
{0} “OFF”
{1} “ON
” (default)
{2} “ERROR”: To hear voice guidance only when fax
transmission/reception fails.
Changing the recording
time for your TAM/FAX
greeting message
{#}{5}{4}{1} “16s” (default): Maximum recording time is 16 seconds.
{2} “60s”: Maximum recording time is 60 seconds.
See page 39 for details.
Copying phonebook
data from the base unit
to the cordless handset
{#}{5}{9}{1} “1 ITEM” (default)
{2} “ALL ITEMS”
See page 24 for details.
Setting the incoming
message monitor
{#}{6}{7} To hear an incoming message (ICM) from the speaker when the
answering machine is recording the message.
{0} “OFF”
{1} “ON” (default)
Feature Feature code Selection
