8. Programmable Features
44
8.3 Basic features
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
Feature Feature code Selection
Setting the quick setup {#}{0}{0}{1} “TAM/FAX” (default)
{2} “DIST. RING”
{3} “TEL ONLY”
{4} “FAX ONLY”
See page 16 for details.
Setting the date and
time
{#}{0}{1} Enter the date and time using the dial keypad. See page 18 for
details.
Setting your logo {#}{0}{2} Enter your logo using the dial keypad. See page 18 for details.
Setting your fax
number
{#}{0}{3} Enter your fax number using the dial keypad. See page 19 for
details.
Printing a confirmation
report
{#}{0}{4}{0} “OFF”: Confirmation reports will not be printed.
{1} “ON”: A confirmation report will be printed after every fax
transmission.
{2} “ERROR” (default): A confirmation report will be printed only
when a fax transmission fails.
Changing the ring
count in FAX ONLY
mode
{#}{0}{6}{1} “1”
{2
} “2”
{3} “3” (default)
{4} “4”
Changing the ring
count in TAM/FAX
mode
*1
Base unit:
{#}{0}{6}
{0} “TOLL SAVER”
{2} “2” (default)
{3} “3”
{4} “4”
See page 34 for details.
Cordless
handset:
{0}{6}{1}
{0} “Toll saver”
{2} “2” (default)
{3} “3”
{4} “4”
See page 34 for details.
Changing the maximum
recording time for
incoming messages
*1
Base unit:
{#}{1}{0}
{0} “GREETING ONLY”: The unit plays the greeting message but
does not record any incoming messages.
{1} “1 MIN”: 1 minute
{2} “2 MIN”: 2 minutes
{3} “3 MIN” (default): 3 minutes
Cordless
handset:
{0}{6}{2}
{0} “Greeting only”: The unit plays the greeting message but
does not record any incoming messages.
{1} “1min”: 1 minute
{2} “2min”: 2 minutes
{3} “3min” (default): 3 minutes
