
193
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Main Speakers
Selects speakers used in MAIN ZONE when “Assign Mode”
(vpage192) is set to “7.1ch + ZONE2”, “7.1ch(Bi-Amp)” or “7.1ch
+ Front B”.
S.Back/F.Height (Default) : Uses surround back and front height
speakers.
S.Back/F.Wide : Uses surround back and front wide speakers.
F.Height/F.Wide : Uses front height and front wide speakers.
Speaker Config.
Indicate speaker presence and select speaker size categories based on
bass reproduction capability.
2 Front
Set the front speaker size.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
%
•When “Subwoofer” is set to “None”, “Front” is automatically set to “Large”.
•When “Front” is set to “Small”, “Center”, “Surround“, “Surr. Back”, “Front
Height” and “Front Wide” can not be set to “Large”.
2 Center
Set the presence and size of the center speaker.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
None : Select when a center speaker is not connected.