155
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Speakers
Setting items Description Page
Audyssey
®
Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
183
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
192
Amp Assign Select power amplifier usage method.
192
Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability.
193
Distances Set distance from listening position to speakers.
195
Levels Set the volume of the test tone to be the same when it is output from each speaker.
196
Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer.
197
Bass Set subwoofer and LFE signal range playback.
198
Impedance Set the impedance of connected speakers.
198
Front Speaker Set the front speaker A/B to use for every sound mode.
198
2 Network
Setting items Description Page
Information Display network information.
199
IP Control Enables network communication in standby power mode.
199
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
199
Settings Make settings for wired LAN.
200
Diagnostics Used to check the network connection.
201
Maintenance Mode Use when receiving maintenance from a Marantz service engineer or custom installer.
202
