61 60
Pre-printing forms for future
use
NOTE: As of version 3.0.2 of MASTERFORM for
UPS Domestic Editon, Print Ahead Mode is not an
option due to the integration with UPS
WorldShip®. If you wish to continue using the
Print Ahead Mode option until January 6, 2003,
you must use MASTERFORM v3.0.1 or earlier.
If you want to pre-print forms that will be
completed at a later time, select the Print Ahead
Mode option in Setup before creating the
shipment template. After you select the Print
Ahead Mode check box, click Done to exit Setup
and save your settings.
Warning! When selected, this option will disable
the Shipper’s Certification end-of-day log.
Shipments you complete in Print Ahead Mode will
not appear on the certification; you will have to
manually complete a certification for them later.
Turning off the Labels Required
field warning
To prevent returned packages, MASTERFORM
reminds you to check the Labels Required field
before leaving the Ground or Air Shipment screen.
If you don’t need the reminder and want to turn
off the message, you can do so by deselecting
the option for Package Label Warning inside
Setup. Simply click once on the check box to
clear it, then click Done to exit Setup and save
your changes.
See Figure 11 on page 41 to see the Package
Label Warning option in Setup.
See MASTERFORM Setup.
