Setting up the network printer
Paper handling
Maintenance
Troubleshooting
Administration
Index
3
Printing
www.lexmark.com
Lexmark E320/E322 Printer
DHCP
This method automatically sets the IP address, netmask, gateway, host name, and WINS
server using a Dynamic Host Configuration Protocol (DHCP) server. The DHCP server or a
forwarding agent must be attached to the same IP subnet as the print server. Make sure the
DHCP server has scope defined for the subnet.
Ensure that the DHCP server provides the following options:
If you are using a WINS server, telnet to port 9000 to set the print server host name.
Print Server TCP/IP Setup Utility
The Print Server TCP/IP Setup Utility is a simple way to set the IP address and other
important IP parameters in a print server. You can set up one or many print servers using this
method with no need to physically visit the printers.
001 Netmask Netmask for IP subnet
003 Router IP address of router (such as 9.10.8.250)
044 WINS/NBNS Server IP address of WINS server
