Setting up the network printer
Paper handling
Maintenance
Troubleshooting
Administration
Index
19
Printing
www.lexmark.com
Lexmark E320/E322 Printer
b Select the IP address of your printer from the list. If the address is not listed, then
click Enter TCP/IP address or Name of Print Server, and then type the address in
the IP address text box.
If you don’t know the IP address, press the operator panel button to print a network
setup page and look under the TCP/IP heading.
c Check the option to Set this protocol to be the default protocol.
d Click OK. The new port is assigned to the printer.
7 Print a test page to verify printer installation. If the Printer Properties window is still
open, click Print Test Page on the General tab.
If you have closed the Printer Properties, do the following:
a Click Start Settings Printers.
b Click File Properties.
c On the General tab, click Print Test Page.
When a test page prints successfully, printer setup is complete.
Part 3: Sharing the printer on the network
1 Click Start Settings Printers.
2 Select the printer you just created.
