pressed on the control panel, the temperature display
goes back to the set brightness.
5.2.1 Setting the brightness
The brightness can be set between h0 (minimum lumi-
nosity) and h5 (maximum luminosity).
u
To activate setting mode: Press SuperFrost button
Fig. 2 (2)
for about 5 seconds.
w
S is shown on the display.
w
The Menu symbol
Fig. 2 (22)
lights up.
u
Press Freezer compartment Up button
Fig. 2 (5)
or
Freezer compartment Down button
Fig. 2 (4)
to select h.
u
To confirm: Briefly press SuperFrost button
Fig. 2 (2)
.
u
To set the display brighter: Press Freezer
compartment Up button
Fig. 2 (5)
.
u
To set the display darker: Press Freezer
compartment Down button
Fig. 2 (4)
.
u
To confirm: Press SuperFrost button
Fig. 2 (2)
.
w
The brightness is set to the new value.
u
To deactivate setting mode: Press Freezer compart-
ment On/Off button
Fig. 2 (3)
.
-or-
u
Wait 5 minutes.
w
The temperature is again displayed in the temperature
display.
5.3 Child-proof lock
You can use the child-proof lock to lock the
buttons. This means that children cannot acci-
dentally switch off the appliance when playing.
5.3.1 Switching on the child-proof lock
u
Activate setting mode: press and hold the SuperFrost
button
Fig. 2 (2)
for approximately 5 s.
w
S is shown on the display.
w
The Menu symbol
Fig. 2 (22)
lights up.
u
Using the Freezer compartment Up button
Fig. 2 (5)
or
Freezer compartment Down button
Fig. 2 (4)
, select c.
u
Press the SuperFrost button
Fig. 2 (2)
briefly to confirm.
When c1 is shown on the display:
u
To switch on the child-proof lock, press the
SuperFrost button
Fig. 2 (2)
briefly.
w
The Child lock symbol
Fig. 2 (19)
LED lights up. c
flashes on the display.
When c0 is shown on the display:
u
To switch off the child-proof lock, press the SuperFrost
button
Fig. 2 (2)
briefly.
w
The Child safety symbol
Fig. 2 (19)
LED goes out. c
flashes on the display.
u
Deactivate setting mode: press the Freezer compart-
ment On/Off button
Fig. 2 (3)
.
-or-
u
Wait 5 min.
w
The temperature is again displayed on the temperature
display.
5.4 Door alarm
If the door is open for longer than 180 seconds,
the acoustic warning sounds.
The acoustic warning stops automatically when
the door is closed.
5.4.1 Switching off the door alarm
The acoustic warning can be switched off when the door
is open. The acoustic warning remains switched off as
long as the door is open. When the door is closed, the
alarm function is active again.
u
Press Alarm button
Fig. 2 (1)
.
w
The door alarm stops.
5.5 Temperature alarm
If the freezer temperature is not cold enough,
the audible warning sounds.
If the wine storage temperature is too warm or
too cold, the audible warning sounds.
At the same time, the temperature display and
the Alarm symbol
Fig. 2 (26)
LED will flash.
The cause of a temperature being too high may be:
-
When sorting and removing food from the appliance,
too much warm ambient air got in.
-
The power was cut off for a while.
-
The appliance is faulty.
The audible warning automatically ceases, the Alarm
symbol
Fig. 2 (26)
goes out, and the temperature display
stops flashing when the temperature is cold/warm enough
again.
If the alarm status remains: (see Troubleshooting).
Note
If the temperature is not cold enough, food may spoil.
u
Check the quality of the food. Do not consume spoiled
food.
5.5.1 Switching off the temperature alarm
The acoustic warning can be switched off. When the
temperature is cold enough again, the alarm function is
active again.
u
Press Alarm button
Fig. 2 (1)
.
w
The acoustic warning ceases.
5.6 Sabbath Mode
After entering Sabbath Mode, you do not have to worry
about lights, digits, icons, tones, alarms or fans. The
defrost cycle operates solely on clock time without any
feedback from usage of the refrigerator. After a power
failure, the appliance will return to Sabbath Mode without
requiring additional input.
Operation
8 * Depending on model and options
