MAINTENANCE WORK ON CHASSIS AND ENGINE 58
Fitting glass fiber yarn filling of main silencerx
500226-11
ಥ Check parts for damage and wear. Replace damaged or worn parts.
ಥ Attach the glass fiber yarn filling to inner tube
. Fit the inner tube into the outer
tube
.
ಥ Insert cap
. Mount and tighten screws.
ಥ Attach the glass fiber yarn filling to insert
. Fit the insert into the outer tube.
Mount and tighten screws.
ಥ Insert end cap
. Mount and tighten screws.
ಥ Fit the main silencer. ( P. 57)
Changing glass fiber yarn filling of main silencerx
ಥ Remove glass fiber yarn filling of main silencer. ( P. 57)
ಥ Fit the glass fiber yarn filling of the main silencer. ( P. 58)
Dismounting the air filter box lid
500222-10
ಥ Pull off the air filter box lid in area to the side and remove to the front.
Installing the air filter box lid
500222-11
ಥ Check parts for damage and wear. Replace damaged or worn parts.
ಥ Insert the air filter box lid into the rear area
and clip it into the front area.
Removing the air filterx
Note
Engine failureಗUnfiltered intake air has a negative effect on the service life of the engine.
ಥ Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazardಗProblem materials cause environmental damage.
ಥ Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
ಥ Dismount the air filter box lid. ( P. 58)
500223-10
ಥ Undo the hose clip.
ಥ Remove the air filter.
